Before
After
Drag
Tokoz TLS
What is tls Wedge?
A tile leveling system for artificial and natural tiles: faster, flatter joints with less lippage. The tls-W series is the leveling wedge tls-Ww, the holder joint tls-Ws and the pliers tls-Wp.
TOKOZ tls-W Series
tls-Ww
tls-Ww leveling wedge
Leveling wedge
Wedges seated in the empty slots of tls-Ws holder joints. Ribbed 89 × 22 × 16 mm profile pulls neighbouring tiles onto one plane without lippage.
- 89 mm length
- 22 mm width
- 16 mm height
- Fits tls-Ws slots
tls-Ws
tls-Ws holder joint
Holder joint
Holder joint for 1 mm, 2 mm and 3 mm grout lines. Rated for 5–13 mm thick porcelain, ceramic and natural stone. Break-away stem leaves a clean joint after the adhesive has set.
- Joint 1 / 2 / 3 mm
- Covering 5–13 mm
- Porcelain, ceramic, stone
tls-Wp
tls-Wp leveling pliers
Leveling pliers
Pliers that clamp the tls-Ww wedge through the tls-Ws holder so the coating sits flush. Adjustable stop on the head keeps pressure even on large-format tiles.
- Hand tool
- Adjustable stop
- Works with tls-Ww + tls-Ws
Tokoz TLS
What is tls Screw?
A screw-type tile leveling system for even artificial and natural tiles. The tls-S series is the screw wedge tls-Sw and the holder joint tls-Ss — hand-tightened on edges and corners, with sight holes to read the joint canal.
TOKOZ tls-S Series
tls-Sw
tls-Sw screw wedge
Screw wedge
Ø54 × 27 mm screw cap turned by hand — no high force, no pliers. Use on sides and corners. Sight holes show how deep the joint canal sits while you tighten.
- Ø54 mm
- 27 mm height
- Hand tightened
- Edges and corners
- Canal sight holes
tls-Ss
tls-Ss screw holder joint
Screw holder joint
Threaded holder with 1 mm and 2 mm joint widths. 63 mm stem for coverings from 3 mm to 17 mm — thin ceramic through thick natural stone on the same floor.
- Joint 1 / 2 mm
- Covering 3–17 mm
- 63 mm stem
- 40 mm head
How to install Tokoz TLS tile leveling
Level large-format tiles with the tls-W wedge set or the tls-S screw set.
- 01. Set the holder. Place tls-Ws (1–3 mm) or tls-Ss (1–2 mm) in the joint under the tile edge.
- 02. Add the wedge. Slide tls-Ww into the holder slot, or thread tls-Sw onto tls-Ss by hand.
- 03. Lock the plane. Close tls-Wp pliers on the wedge line, or turn tls-Sw until tiles are flush and the canal is visible in the sight holes.
- 04. Break away. After the adhesive has set, kick or twist off the holder stem. The joint stays clean for grout.
tls-W wedge or tls-S screw: which set?
tls-W (tls-Ww, tls-Ws, tls-Wp)
- 1 / 2 / 3 mm joints
- 5–13 mm coverings
- Pliers tls-Wp for speed on large fields
- Break-away holder after adhesive set
tls-S (tls-Sw, tls-Ss)
- 1 / 2 mm joints
- 3–17 mm coverings
- Hand-tight, no pliers
- Edges, corners and sight holes on tls-Sw
TLS tile leveling FAQ
What is included in the Tokoz TLS wedge series?
tls-W is three parts: tls-Ww leveling wedges, tls-Ws holder joints (1 / 2 / 3 mm, 5–13 mm coverings) and tls-Wp pliers.
What is included in the Tokoz TLS screw series?
tls-S is two parts: the hand-tightened tls-Sw screw wedge and the tls-Ss holder (1 / 2 mm joints, 3–17 mm coverings). No pliers required.
When should I choose tls-W instead of tls-S?
Use tls-W with pliers on 5–13 mm tiles and 1–3 mm joints when you want fast field production. Use tls-S when you need 3–17 mm thickness, 1–2 mm joints, or hand work on edges and corners.
Rise up Safely
Plastic and Building Materials International
Our sense of quality
As long as we preserve nature, nature preserves us.
